The walimex pro audio adapter is a 2 channel XLR adapter with pre-amplifier and phantom power. Ideal of all DSLR cameras with an integrated microphone socket A display shows optical monitoring of the sound recording. There is also a wide range of settings to optimise the sound quality. The audio adapter can be attached simply from below via a 1/4 inch thread to the camera.
Functions
LCD Display: Level status display in dB
GAIN switch: Signal amplifier, low to high +20dB
PEAK switch: On/off switch of the LED signal displays. LEDs flash red in the event of overload
Monitor PLAY/REC switch: Play for headset - playback of camera audio signals. REC for headset - recording of audio signals during recording
AGC on/off switch: when activated (on), the output level of the camera is kept constant. Note: Function only possible with AGC cameras. Read the manual for your camera to learn more about this.
M/S switch: to select mono (M) or stereo (S) output mode
POWER switch: On/off switch
PHANTOM 12 V/48 V switch. For 12 or 48V condenser microphones. Note: Most microphones use 12 V. Read the manual for your microphone to learn more about this.
LINE/MIC/PH switch
LINE mode is for amplifiers and other audio devices with a line output. The signal is reduced to approx. 40dB
MIC mode is for self-powered microphones
PH (phantom) mode is for microphones with a pH value that require a phantom setting.
Product Color | Black, Red |
Length | 155mm |
Width | 98mm |
Height | 64mm |
Weight | 599g |
frequency | 20 Hz - 20kHz (+/-0,5 dB)Hz |
Power Supply | 1x 9 V monobloc battery (3 hrs without phantom supply) |
Connection | 1/4 inches of thread |
1/4 inch accessories thread | Yes |
modular system | No |
Type | Audio Adapter |
Girth | 760mm |
Height of Packaging | 97mm |
Length of Packaging | 216mm |
Weight incl. Packaging | 839g |
Width of Packaging | 175mm |