The walimex pro Carbon Follow Focus Prallax Slider deserves its name – it is a professional tool with which you can perform wobble-free and gentle camera tracking, increasing the quality of your films considerably.
High-quality workmanshipThe slider is extremely well-made and, thanks to precisely produced carbon tubes and CNC-milled aluminium parts, can also meet professional requirements. Thanks to the materials used, all three carbon slider models are stable and yet very light.
Multiple adjustment possibilitiesTo be operational in all situations, and on all filming locations, the slider has an adjustable boom with grating and height-adjustable rubber feet to ensure it stands securely and horizontally at all times.
Camera slide and rollers/bearingsThe large camera slide has both a rubberised contact surface to protect the bottom of the camera and an in-built bubble level to make it easier to place the slide down level. The rollers, thanks to the very good bearings, run smoothly on the carbon tubes without any noticeable stutters or vibrations. Extremely smooth camera travel can be achieved with slider lengths of 80 cm and 120 cm, throughout the entire slide length. The carriage offers, with its 3/8-inch thread pin, the correct connection for a video panhead or ball head. On the front side, there is a fastening screw with which it is possible both to adjust the friction and to block the camera slide, for example, when transporting it.
Compatible and open to the worldThe slide, thanks to its sturdy construction and high-quality materials, is really “open to the world” and compatible with many recording devices, e.g. with professional cinema cameras, DSLRs, mirrorless cameras / CSC, action-cams, smartphones (compatible smartphone holders are optional available)
When you need just that little bit moreAnd because we literally want to put on more, we have tested the maximum load-bearing capacity in the studio. And see – you can really lay it on: 25 kg (80 cm) / 21.5 kg (120 cm) – so, even with heavy camera equipment, wobble-free travel over the entire length of the slider is possible.
Well-protected when on tourThe slider comes with a padded carry bag in which it can be further tied down with two retention straps – the smooth carbon tubes and the light runners are always protected during transportation and when not being used to ensure wobble-free and gentle camera travel.
The slide familyThe walimex pro Carbon Follow Focus Prallax Slider set includes two models: 80 cm (art. no. 21639) and 120 cm (art. no. 21640). This means that you will have the right slider for all occasions.
The tool for professionals:swivel arms or friction arms are now essential pieces of photography and video-making equipment – whenever you wan to attach, adjust or lock or just secure your equipment, there’s no way around using a swivel arm. In addition to smaller swivel arm variations with a 1/4 inch connector (art. No. 18316 with 18 cm or art. no. 18582 that is 28 cm in length) that can be used with video rigs and in tabletop photography, walimex pro now also offers the large friction arm model made to be extremely sturdy for heavy loads such as DSLRs, video cameras, light, flash heads etc.!
Version:Both arms have 5/8 inch spigots and are, therefore, compatible with all current super clamps (e.g. walimex pro super clamp art. No. 12499) that have the corresponding spigot mount. Thanks to the inner thread (1x 1/4 inch and 1x 3/8 inch) in the spigots, almost any photo and video accessories can be screwed on or adapted, which once more extends the scope of this swivel arm enormously.
Features:
The large, grippy hand wheel means you can securely lock the swivel arm in the desired position. The grating in the middle axis prevents any additional slipping or dropping of the boom.
Uses:These dependable and sturdy swivel arms have been used for many years in areas other than photography and video productions. This multi-talent item is also used in events and in healthcare for safely securing equipment and for adapting medical devices.
Technical highlights:It can hold approx. 5 kg, and the total length is 53 cm.
With this Super Clamp you will get the ultimate fastening tool for your studio. It provides almost unlimited possibilities, because it can be fastened on lamp tripods, extension arms, edges, plates and much more.
Material | Metal |
Product Color | Silver |
Connection | 1/4 and 3/8 inch |
Material | Metal, synthetiv material (handle) |
Product Color | Black |
Length | 90mm |
Width | 50mm |
Height | 100mm |
Weight | 475g |
Clamping Range | 1 - 6cm |
Operation Area | Photo Studio |
Product Type | Action Cam Keeping, articulated arm |
Weight | 977g |
Length | 53mm |
Material | stainless steel, anodized aluminium/die-cast, plastic (ABS) |
Max. Capacity | 5kg |
3/8 inch accesories thread | Yes |
Product Color | Black, Orange |
Product Type | cameraslider |
Material | Carbon, anodized CNC-milled aluminium |
Height | 105mm |
Width | 160mm |
Weight | 1940g |
Length | 800mm |
Rail- or Wheel-System | Railsystem |
Carrying Capacity | 25kg |
Girth | 2380mm |
Height of Packaging | 190mm |
Length of Packaging | 1120mm |
Weight incl. Packaging | 4503g |
Width of Packaging | 440mm |