Walimex pro Emerger 400 Set Double
- full studio flash set with 2x Emerger 400 studio flashes and accessories
- lightweight and compact
- integrated 2.4 GHz receiver
- flash output 400 Ws
- ideal for smaller studios
- high light output
- easy to operate
Light and compact
The complete walimex pro Emerger 400 Double Set with new high-quality metal optic finish is a compact starter flash set with two studio flashes and accessories to get started immediately. Ideal for ambitious hobby photographers who want to get even more out of their hobby or who want to take the step into professionalism on a budget. Due to its compact size, the studio flashes are ideal for smaller studios as well as for mobile use. Perfect for small peoples shoots and small product shots.
Powerful and modern
The studio flashes are light and compact at less than 2 kg each and have an integrated 2.4 GHz receiver with 16 channels and 4 groups. They can be triggered by the radio trigger included in the set and is ideal for use with ceiling rail systems. With a flash output of 400 watt/s, which can be continuously adjusted from 1/1 to 1/32, the flash is ideal for smaller studios as well as for mobile applications. It also has a powerful LED modelling light (25 watts) and a plug-in flash tube. Compared to the previous model, they also have a shorter recharge time (0.2-0.9s) and, thanks to the new standard reflector, a better light output and more even illumination. Thanks to overheating protection and quiet fan cooling, undisturbed creative work is thus possible without any problems.
Easy operation
The flashes are easily controlled via the user-friendly control panel, perfect for ambitious amateur photographers to achieve even more professional results. The flash can be triggered via a radio shutter release (included in the set). The power supply is ensured by a mains cable. The studio flashes can be used with other studio flashes, especially with the Newcomer and Emerger series as well as our studio accessories such as lamp tripods, soft boxes with Bowens/walimex pro connection, umbrellas, etc.
Accessories included
Including 2x lamp tripod FT-8051 with spring damping (load capacity up to 5kg). It can be extended from 90cm up to 260cm. Furthermore, the set includes 2x walimex pro soft boxes (60x90cm) with front and intermediate diffuser as well as Bowens/walimex pro adapter to attach the softbox and a radio trigger to get started right away.
1x Walimex pro VE& VC& Newcomer Studioblitz Auslöser
General information
| Material | Metal; synthetic material |
| Product Color | Black |
| Length | 60mm |
| Height | 30mm |
| Width | 40mm |
| Weight | 25g |
Specifications
| Range | 3000cm |
| Transfer | Funk |
| Power Supply | Battery CR 2032 3V, Batteries included |
| Frequency Channels | 16 |
| Radio Frequency | 2400MHz |
| Max. Synchronous Speed | 1/160s |
| Compatibility | Walimex pro VE excellence series, Walimex pro VC excellence series, Walimex pro newcomer series |
1x Walimex pro FT-8051 Lampenstativ 260cm 2er Set
General information
| Product Type | Lamp tripod, Studio tripod |
| Material | Aluminium alloy, synthetic material (locks) |
| Product Color | Black |
| Length | 890mm |
| Width | 90mm |
Specifications
| Min. Working Height | 900mm |
| Max. Working Height | 2600mm |
| Max. Load Tripod | 5000g |
| Connection | 1/4 Inch with thread connection, Spigot 5/8 16 mm cone |
| Tripod Excerpts | 3St. |
| Number of Tripod Segments extendible | 2 |
| Recession obstructed | Yes |
| Damping System | Spring damping |
| Diameter 1st Tripod Segment (from below) | 30mm |
| Diameter 2nd Tripod Segment (from below)Diameter 2nd Tripod Segment (from below) | 25mm |
| Diameter 3rd Tripod Segment (from below) | 21mm |
| Material Tripod Legs | Aluminium |
| Type | Lamp tripod |
2x Walimex pro Emerger 400 Studioblitz
General information
| Product Color | Grey |
| Width | 125mm |
| Weight | 1900g |
| Height | 300mm |
Specifications
| Power Supply | AC 220-240V/50Hz |
| Trigger Mode | Photo cell, Sync cord, Test button |
| Tripod Connection | Spigot |
| Power Stage | 1/1 - 1/32 |
| Flash Duration | 1/800 ~ 1/1200s |
| Flash Output | 400Ws |
| Colour Temperature | 5600±200K |
| Trigger Tension | 5V |
| Microfuse | 6,3A |
| Guide Number | 70 |
| TTL Transfer | No |
| Flash Tube | Plug-in |
| Slave | Yes |
2x Walimex pro Basic Softbox 60x90
General information
| Product Color | Black |
| Material | Nylon, metal |
| Weight | 1200g |
| Length | 600mm |
| Width | 900mm |
Specifications
| Field of Application | Beauty, People Photography, Photo- and Video-Works, Product Photography |
| Softbox Type | Rectangular Softbox |
| Coating | Silver |
| Depth | 570mm |
| size | 60x90cm |
| Grid/Overlay | No |
| Interdiffuser | Yes |
Packaging
| Girth | 3040mm |
| Height of Packaging | 436mm |
| Length of Packaging | 1184mm |
| Weight incl. Packaging | 15693g |
| Width of Packaging | 490mm |
- 2x walimex pro Emerger 400 studio flash (each 1x standard reflector, 1x power cord 4m, 1x sync cord 4m, 1x protective cap, 1x flash tube built-in)
- 2x Walimex pro softbox 60x90cm incl. front and rear diffuserr
- 2x Walimex pro softbox adapter Walimex pro & K
- 2x Walimex pro FT-8051 lamp tripod 260cm
- 1x Walimex pro VE&VC& Newcomer studio flash trigger